Recovery Pumps

Shop By
mSORB® Molecular Sieve Beads Type 13X - 2LBS
translation missing: en.products.product.regular_price $28.00 $22.00 On Sale
translation missing: en.products.product.regular_price $28.00 $22.00 On Sale

mSORB® Molecular Sieve Beads Type 13X - 2LBS

mSORB® 13X molecular sieve is a multiple purpose, highly porous, high capacity alkali metal alumino-silicate in the spherical form. It is the sodium form of the Type X crystal structure with pore diameters of approximately 10A. It can adsorb all molecules that can be adsorbed by 3A, 4A, and 5A molecular sieve. Type 13X molecular sieve can also adsorb molecules such as aromatics and branched-chain hydrocarbons, which have large critical diameters.

Handling & Storage Recommendations:

Store in a dry location to prevent unintentional water adsorption. Reseal packages after opening to prevent contamination and unintentional water adsorption. We recommend that you rotate stock so oldest material is used first. Please read the safety data sheet to ensure proper handling and always wear personal protection equipment when handling molecular sieve.

Product Data and Safety Information:

 

 

 

CPS TRS21 Anti-spark/explosion pump European Version
translation missing: en.products.product.regular_price $1,000.00 $999.99 On Sale
translation missing: en.products.product.regular_price $1,000.00 $999.99 On Sale

The CPS TRS21 R-600 Anti-Spark & Explosion Butane Recovery Pump is a 2-Cylinder oilless compressor used to recirculate solvent through the system such as butane and propane.

Increase processing speed and yield by using this butane recovery pump from CPS Products, which can also reclaim solvent to decrease recovery time to just minutes. The CPS TRS21 R-600 Anti-Spark & Explosion Butane Recovery Pump is ignition proof and meets ANSI/ISA 12:12.1. This CPS butane recovery pump weighs 24 pounds and features a power rating of 850 watts.

Key Features:
• CPS TRS21 R-600 Recovery Pump, 2 Cylinder Oil-Less Compressor

Specifications:
• Recovery Rates: Vapor- 2.5lb/min, Liquid-12lb/min
• Ignition Proof Construction ANSI/ISA 12:12.1
• Power : 115 VAC, 60 Hz, 10 Amps
• Power: 850 watts
• Filtration: Internal 100 mesh Screen integrated into Suction Port
• Weight : 24 LBS

Maintenance
Please note: the regular maintenance and replacement of seals on the CPS TRS21 R-600 anti-spark & explosion recovery pump is NOT covered under warranty as these are normal wear and tear items. Compressor Seals will require re-build after 200-240hrs of operation, depending on use. We stock the following compatible rebuild kits for your convenience:
TR21X1 Valve Rebuild Kit
TR21X2 Complete Rebuild Kit
TR21X3 Piston Rebuild Kit
&bull TR21X4 Head Rebuild Kit

***DISCLAIMER TO CUSTOMER: Running any solvent that is not authorized by CPS voids all warranty. Running any solvent mixed with any organic plant material will instantly void all warranty. Any Odor coming from the pump or organic plant residuals will also void all warranty.

 

CPS TRS21 Recovery Pump Condensing Coil Kit
translation missing: en.products.product.regular_price $1,150.00 $1,000.00 On Sale
translation missing: en.products.product.regular_price $1,150.00 $1,000.00 On Sale

TRS21 Condensing Coil Kit

The CPS TRS21 is an Anti-Spark/Explosion recovery pump designed and built specifically for R-600. This refrigerant recovery pump features an Ignition Proof Construction that meets ANSI/ISA 12:12.1. This kit features the CPS TRS21 recovery pump and a reliable condensing coil that includes 1/4" 37 degree flares.

The recovery tank can be used to recirculate the solvent through the system increasing speed of processing and yield. This refrigerant recovery pump can also be used to reclaim the solvent to greatly increase recovery time to minutes.

This Kit includes:

  • CPS TRS21 Anti-Spark/Explosion Recovery Pump
  • Small Condensing Coil with 1/4" 37 Degree Flares

Key Features:
• CPS TRS21 R-600 Recovery Pump, 2 Cylinder Oil-Less Compressor

Specifications:
• Recovery Rates: Vapor- 2.5lb/min, Liquid-12lb/min
• Ignition Proof Construction ANSI/ISA 12:12.1
• Power: 115 VAC, 60 Hz, 10 Amps
• Power: 850 watts
• Filtration: Internal 100 mesh Screen integrated into Suction Port
• Weight: 24 LBS

Maintenance
Please note regular maintenance and replacement of seals is NOT covered under warranty as these are normal wear and tear items. Compressor Seals will require re-build after 200-240hrs of operation, depending on use.

***DISCLAIMER TO CUSTOMER: Running any solvent that is not authorized by CPS voids all warranty. Running any solvent mixed with any organic plant material will instantly void all warranty. Any Odor coming from the pump or organic plant residuals will also void all warranty.

 

Master Vapor MVP-6CFM Explosion Proof Recovery Pump
translation missing: en.products.product.regular_price $12,000.00 $11,499.99 On Sale
translation missing: en.products.product.regular_price $12,000.00 $11,499.99 On Sale

MVP-6CFM Explosion Proof Recovery Pump 

This item carries a 1-2 week lead time from the manufacturer.

The Master Vapor MVP-6CFM Vapor Recovery Pump is designed for hydrocarbon extraction processing. The Dual-Diaphragm recovery pump is electrically powered by an explosion-proof motor. The Master Vapor MVP-6CFM refrigerant recovery pump is built with stainless steel wetted parts. This recovery system includes a max allowable working pressure of 350 PSI. Each Master Vapor recovery tank is certified and made in the USA. This recovery pump and system features a maximum pumping inlet vacuum of 27 InHg (0.91 bar). The Master Vapor MVP-6CFM Explosion Proof Recovery Pump includes a maximum pumping speed of 190 CPM to meet the unique requirements of your project.

Performance Factoids:

  • Recover LP-Gas vapor at over 6CFM (cubic feet per minute)
  • Recover butane at up to 1 LB/Min (pounds per minute)
  • Recover and recondense butane at over 12 GPH (gallons per hour)
  • Maximum pumping outlet pressure: 60 PSI (4.1 bar) continuous, 70 PSI (4.8 bar) intermittent
  • Maximum pumping inlet vacuum produced: 27 InHg (0.91 bar)
  • Maximum pumping speed: 190 CPM (cycles per minute)
  • Pump static withstand pressure rating: MAWP 350 PSI (24 bar)
  • Materials: pressure section: stainless steel; diaphragms: FKM; reed valves: stainless steel
  • Optional PTFE diaphragms kit available
  • Process gas temperature range: FKM -40-275F (-40-135C); PTFE +40-220F (4-104C)
  • Recommended FKM replacement schedule: every 1000 hours running time
  • Air temperature range for motor/gearbox operation: 32-104F(0-40C)

Pump Head Charge:

  • Motor is coupled to diaphragms with patented gas pressure charged chamber
  • Pumping outlet pressure runs about 10 PSI lower than the charge gas pressure level
  • Non-reactive CO2 gas is used to charge the pump head
  • CO2 gas is safer than air for driving the pump
  • CO2 gas is non-flammable and non-explosive with LPG (should a diaphragm ever leak)
  • CO2 gas regulator with gauges is provided with pump assembly
  • CO2 tank is operator provided (cannot ship filled tanks) - from any welding supply store
  • Pump charge gas supply: standard (#20) 5 LB tank of industrail CO2
  • Typical CO2 gas usage: <0.2 SCFH (very little); estimated life of charge gas tank: 1 year
  • Pump charge gas pressure range: continuous 5 to 70 PSI (1.4 to 5.5 bar); to 80 PSI intermittent

Electrical and Mechanical:

  • Electric motor: explosion proof for C1D1 hazardous areas; rated Class I Gr C & D, Class II Gr F&G
  • Electric motor: 1 HP, 1800 RPM, 60 Hz
  • Motor option: Model MVP-6CFM-1PH: Single-phase: 115/208-230V, 13.4/6.7 FLA (full load amps)
  • Motor option: Model MVP-6CFM-3PH: Three-phase: 208-230/460V, 3.3/1.65 FLA, Inverter-rated
  • Pump Speed: 190 CPM (cycles per minute) at 60 Hz
  • Noise: sound pressure measured 1 meter from pump: 80.5 dBa
  • Porting: process inlet and outlet: 1/2" JIC-male
  • Added ports for optional pressure gauges: inlet and outlet: 1/4" FNPT
  • Inlet & outlet ports at ideal equipment connections heights 46" and 41" above floor
  • Size: 17.0" x 19.9" x 46" tall; minimum use of valuable floor space
  • Weight: 182.5 lb (82.8 kg)

Operating Manual: https://mastervaporpumps.com/wp-content/uploads/2017/09/Master-Vapor-Pumps-MVP-6CFM-Operation-Manual-3A5262A.pdf

Motors & Wiring: https://mastervaporpumps.com/wp-content/uploads/2017/09/Master-Vapor-Pumps-MVP-6CFM-Motors-Wiring-rev1-1.pdf

Mastercool 55975 Intellasense III Combustible Gas Leak Detector
translation missing: en.products.product.regular_price $170.00 $144.99 On Sale
translation missing: en.products.product.regular_price $170.00 $144.99 On Sale

INTELLASENSE III COMBUSTIBLE GAS LEAK DETECTOR

55975

At the heart of the Mastercool Intellasense III Combustible Gas Leak Detector is a new low power metal oxide gas sensor with superior performance properties such as lower current consumption and sensor longevity. The new sensor on this electric gas leak detector is characterized by high sensitivity and fast response upon detecting the presence of extremely small levels of chlorofluorocarbon gases. For this reason, this sensor was selected and integrated into the Mastercool 55975 Combustible Gas Leak Detector.

In addition, the Mastercool electric gas leak detector features a powerful microprocessor that is integrated into the design. The microprocessor automatically selects the best operating condition for the sensor to ensure optimum performance throughout its life.

The Mastercool IntellaSense III Combustible Electric Gas Leak Detector comes in a blow molded case with 2 “C” batteries, leak test vial and replacement filters.

Specifications:

  • Detects combustible gases (see below)
  • Heated tin oxide sensing element
  • 2000 hour sensor life
  • Less than 1 second respond time
  • 50 – 1000 ppm ultimate sensitivity
  • Battery: 2 “C” Alkaline 6000 mAh batteries
  • Operating Temperature Range: 0˚F to 120˚F
  • Intelligent tip 15″” inch probe length with environment sensing element to  eliminate the potential of false alarms
  • Six vertical LED display with enabled selectively (red, yellow or green) to display information to the user such as the relative signal level of the detected leak, the selected sensitivity range (low/medium or high) of the unit, diagnostic information such as low battery, interference/wait, contaminated atmosphere readiness of the unit or fault conditions of the unit
  • Keypad control with ON/OFF button (push-on/push-off), Volume/Mute button (high, low or mute), Sensitivity button for high, medium and low sensitivity level selection and Peak button when multiple leaks are suspected (push enable/disable)

DETECTS: Acetone, Acetylene, Ammonia, Benzene, Butane, Butanol, Chlorine, Ethane, Ethanol, Gasoline, Hexane, Hydrogen, Hydrogen Sulfide, Isobutane, Methane (natural gas), Methanol, Methyl Acetate, Methyl Chloride, Methyl Ether, Naptha, N-Butane, Pentane, Propane, Propanol, Sulfer Dioxide and Trichloroethane

Login