Shop Mastercool Recovery Pumps & Machines

Shop By
Mastercool 61010-EUGRN 6L Refrigerant Recovery Reclaim Cylinder
translation missing: en.products.product.regular_price $59.99
translation missing: en.products.product.regular_price $59.99

Mastercool 6L Refrigerant Recovery Reclaim Cylinder Holds 6~lbs of Solvent.

Product Description

  • Y-valve for liquid/vapor TPED approved
  • Single valve for vapor TPED approved
  • Raised collar for ease of handling and protection
  • Tanks Conform to PED and ADR regulations
  • CE and TÜV approved
  • Used for storage and transport of refrigerant gases
  • Size (w x h): 185 mm x 338 mm
  • Standard Specification: ADR/RID2009, EN13322-IN D TUV 1
  • Service Pressure: 32 bar
  • Air Tightness Pressure: 32 bar
  • Bursting Volumetric Expansion Rate: >20%
  • Tare Weight: 5.18 kg
  • Nominal Water Capacity: 6 l
  • Tank Test Pressure: 48 bar
  • Bursting Pressure: >108 bar
  • Body Material: HP295

61010-EUGRN: double valve

  • 1/4″ FL-M (7/16-20) connection
  • Color: green

***Note: Tank Comes Pre-charged with nitrogen to keep the interior dry and is not DOT rated.


 


 

Mastercool 55975 Intellasense III Combustible Gas Leak Detector
translation missing: en.products.product.regular_price $170.00 $144.99 On Sale
translation missing: en.products.product.regular_price $170.00 $144.99 On Sale

INTELLASENSE III COMBUSTIBLE GAS LEAK DETECTOR

55975

At the heart of the Mastercool Intellasense III Combustible Gas Leak Detector is a new low power metal oxide gas sensor with superior performance properties such as lower current consumption and sensor longevity. The new sensor on this electric gas leak detector is characterized by high sensitivity and fast response upon detecting the presence of extremely small levels of chlorofluorocarbon gases. For this reason, this sensor was selected and integrated into the Mastercool 55975 Combustible Gas Leak Detector.

In addition, the Mastercool electric gas leak detector features a powerful microprocessor that is integrated into the design. The microprocessor automatically selects the best operating condition for the sensor to ensure optimum performance throughout its life.

The Mastercool IntellaSense III Combustible Electric Gas Leak Detector comes in a blow molded case with 2 “C” batteries, leak test vial and replacement filters.

Specifications:

  • Detects combustible gases (see below)
  • Heated tin oxide sensing element
  • 2000 hour sensor life
  • Less than 1 second respond time
  • 50 – 1000 ppm ultimate sensitivity
  • Battery: 2 “C” Alkaline 6000 mAh batteries
  • Operating Temperature Range: 0˚F to 120˚F
  • Intelligent tip 15″” inch probe length with environment sensing element to  eliminate the potential of false alarms
  • Six vertical LED display with enabled selectively (red, yellow or green) to display information to the user such as the relative signal level of the detected leak, the selected sensitivity range (low/medium or high) of the unit, diagnostic information such as low battery, interference/wait, contaminated atmosphere readiness of the unit or fault conditions of the unit
  • Keypad control with ON/OFF button (push-on/push-off), Volume/Mute button (high, low or mute), Sensitivity button for high, medium and low sensitivity level selection and Peak button when multiple leaks are suspected (push enable/disable)

DETECTS: Acetone, Acetylene, Ammonia, Benzene, Butane, Butanol, Chlorine, Ethane, Ethanol, Gasoline, Hexane, Hydrogen, Hydrogen Sulfide, Isobutane, Methane (natural gas), Methanol, Methyl Acetate, Methyl Chloride, Methyl Ether, Naptha, N-Butane, Pentane, Propane, Propanol, Sulfer Dioxide and Trichloroethane

90066-B-SF  SPARK FREE 6 CFM VACUUM PUMP (SINGLE STAGE)
translation missing: en.products.product.regular_price $177.99
translation missing: en.products.product.regular_price $177.99

90066-B-SF 
SPARK FREE 6 CFM VACUUM PUMP (SINGLE STAGE)

 

Product Description

The Mastercool 6CFM Single Stage Spark Free Vacuum Pump is engineered with spark free parts and materials to ensure a safe operation. This Mastercool vacuum pump is able to eliminate oil back flow issues with a built-in check valve. This Mastercool 6CFM Single Stage Spark Free Vacuum Pump includes a motor that is thermally protected from unexpected incidents to ensure longevity and durability. The Mastercool Vacuum Pump boasts a vapor discharge or fill port for your convenience.

This Mastercool vacuum pump features a durable fan that is designed to keep the motor and pump at an optimal temperature. In addition, the Mastercool 6CFM Single Stage Spark Free Vacuum Pump includes a big sight glass that displays the oil levels. In addition, this Mastercool Vacuum Pump features a 1/3 HP motor to help you get the job done. 

  • Constructed with spark free components
  • High volume fan provides cool air motor and pump
  • Vapor discharge/oil fill port, easily removable, contains internal check valve to prevent escape of liquid oil
  • Internal check valve to prevent oil back flow
  • Cooling fins to keep temperature cooler during extended motor operation
  • Thermally protected motor with on/off rocker switch
  • Large, lightweight reinforced base for stable positioning
  • Easily accessible oil drain valve
  • Large oil level sight glass with max/min oil level indicator

SPECIFICATIONS:

  • No. of Stages: 1
  • Free Air Displacement: 6 CFM
  • Ultimate Vacuum: 80 Microns
  • Pump Motor: 1/3 HP
  • Pump Speed: 1720 RPM
  • Electrical Specs: 110/120 V/60 Hz
  • Dimensions: 15 x 6.5 x 11″
  • Shipping Weight: 20.5 lbs

* PLEASE NOTE: The micron readings on all vacuum pumps represent optimal laboratory conditions. Field conditions may vary from these readings.

SERVICE INFORMATION:
Oil Capacity: 18 oz / 536 ml

Login